Fix Epson WF 4630 Error Code 0x97 – Printer Issue Solved

Are you experiencing the Epson WF 4630 error code 0x97 on your printer? I have the solution to this frustrating issue.

Important
Fortect addresses freezing and slow programs caused by damaged registry, missing files, or excessive junk on the computer.

Download Now

Understanding the Error Code

Epson WF 4630 error code 0x97 error message on printer display

If you’re encountering the Epson WF 4630 Error Code 0x97, there are a few steps you can take to resolve the issue. Firstly, unplug the printer from the power source and leave it for about 5 minutes. This will reset the printer and may resolve the error. After the 5 minutes, plug the printer back in and turn it on. If the error persists, you may need to check for any paper jams or obstructions in the printer that could be causing the problem.

Additionally, clean the print head and nozzles to ensure they are not clogged. If these steps do not resolve the error, it may be necessary to contact Epson support for further assistance.

Common Causes of the Malfunction

  • Clogged printer nozzles or printhead
  • Outdated or corrupted printer drivers
  • Hardware issues with the printer

Clogged printer nozzles or printhead

  • Turn off the printer and unplug it from the power source
  • Open the printer cover and carefully clean the printhead and nozzles with a lint-free cloth and distilled water
  • Allow the printhead and nozzles to dry completely before closing the printer cover and plugging the printer back in

Outdated or corrupted printer drivers

  • Open Device Manager by pressing Windows key + X and selecting Device Manager from the menu
  • Locate the printer in the list of devices, right-click on it, and select Update Driver
  • Follow the on-screen instructions to update the printer drivers

Hardware issues with the printer

  • Check for any visible hardware issues such as paper jams, obstructions, or damage to the printer components
  • If necessary, consult the printer’s user manual or contact the manufacturer for further assistance

Initial Troubleshooting Steps

To troubleshoot the Epson WF 4630 Error Code 0x97, start by turning off the printer and unplugging it from the power source. Next, disconnect all the USB cables and remove any connected devices. After that, open the printer casing and check for any jammed paper or foreign objects. It’s also important to examine the ink cartridges and make sure they are properly installed.

If the issue persists, you can try resetting the printer by holding down the power button for 60 seconds. Additionally, updating or reinstalling the printer driver may help resolve the error code.

Updated: February 2024

Fortect can help with the error code 97 on Epson WF 4630 by repairing damaged system files and faulty settings that may be causing the issue. It also addresses freezing programs, missing DLL files, and the Blue Screen of Death, which could be contributing to the error.

Additionally, Fortect can restore the system to its pre-infected state, which may help resolve the error code 97.

Resetting the Printer Hardware

To reset the printer hardware and fix the Epson WF 4630 error code 0x97, follow these steps. First, turn off the printer and unplug the power cord from the electrical outlet. Then, disconnect any USB or Ethernet cables connected to the printer. Next, remove the paper tray and any paper or foreign objects from the printer.

After that, open the printer cover and remove the ink cartridges. Once everything is removed, wait for about 5 minutes. This will allow the printer to reset. After 5 minutes, plug the power cord back into the electrical outlet and turn the printer on.

Once the printer is on, reinsert the ink cartridges and paper tray. Finally, try printing a test page to see if the error is resolved. If the error persists, consider contacting the manufacturer for further assistance.

Performing a Nozzle Check and Cleaning

Performing a Nozzle Check and Cleaning is a crucial step in resolving the Epson WF 4630 Error Code 0x97. To do this, first, turn on the printer and open the printer cover. Then, press the “Home” button and select “Setup” using the arrow buttons. Next, navigate to “Maintenance” and select “Nozzle Check. ” This will print a test page to check for any clogged nozzles.

If there are any issues, proceed to clean the print head by selecting “Head Cleaning” in the Maintenance menu. It’s important to follow the on-screen instructions carefully during this process. Once the cleaning is complete, perform another Nozzle Check to verify if the issue has been resolved.

Updating and Installing Printer Drivers

To update and install printer drivers, follow these steps. First, go to the official Epson website and search for the drivers for your WF 4630 printer. Download the latest driver for your specific operating system. Once the driver is downloaded, open the file and follow the on-screen instructions to install it. Make sure to restart your computer after the installation is complete.

Next, check for any available updates for your printer firmware. Go to the Epson website and search for your printer model. Download and install any available firmware updates for your printer. This will ensure that your printer is running the latest software.

After updating the printer drivers and firmware, test your printer to see if the error code 0x97 is resolved. If the issue persists, you may need to troubleshoot further or contact Epson support for assistance.

Advanced Resolution Techniques

Resolution Technique Description
Restart the Printer Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
Clean the Print Head Use the printer’s cleaning utility to clean the print head and remove any clogs or debris.
Update Firmware Check for firmware updates on the Epson website and install any available updates to fix the error.
Contact Epson Support If the error persists, contact Epson customer support for further assistance and troubleshooting.

F.A.Q.

What do I do when my Epson printer says scanner error?
When your Epson printer says scanner error, start by turning off the scanner and then turning it on again. If the Error and Ready lights are still flashing, there may be a malfunction with the scanner or the scanner lamp may need to be replaced. Contact Other Software Technical Support for further assistance.

How do I fix a fatal error on my Epson printer?
To fix a fatal error on your Epson printer, start by turning off the printer and then turning it back on. If the error persists, replace the ink cartridge with a new one. If the issue continues, contact your dealer for further assistance.

How do I get my Epson printer out of error mode?
To get your Epson printer out of error mode, start by turning off the printer and waiting for at least 5 seconds before turning it back on. If the error message persists, take note of the error number displayed on the LCD panel, then turn off the printer, unplug the power cord, and seek assistance from a qualified service representative.

How do I fix Epson printer error 97?
To fix Epson printer error 97, you can start by restarting the printer and checking for any paper jams or foreign objects.

Example Alert
🔍

The error code 97 on the Epson WF 4630 indicates a problem with the printer’s internal components. Download this tool to run a scan

Was this article helpful?
YesNo

Similar Posts